Panasonic ET-CUK10_CUK10P Geometry Manager Pro Ver.4.0 - Page 96
Camera Setting, If [Geometry, Edge Blending, Color Matching] or [Geometry
![]() |
View all Panasonic ET-CUK10_CUK10P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Auto Screen Adjustment Auto Screen Adjustment procedure 2) Click [Next]. zz When [Next] is clicked, the current geometry correction data is saved to the storage location. zz To return to the previous screen, click [Back]. Camera Setting 1 Verify camera connection in the camera connection screen. [Search Camera] Check boxes [Clear All] [Select All] Camera connection screen 1) Click the [Search Camera] button. zz The model names of the detected cameras are listed. zz If a camera is not displayed in the list, check the following. - The camera is properly connected - The camera is turned on zz Verify that the check boxes of the cameras to be used are selected. zz You can select all the cameras by clicking the [Select All] button, or clear selection of all the cameras by clicking the [Clear All] button. 2) Click [Next]. zz To return to the previous screen, click [Back]. zz If [Geometry, Edge Blending, Color Matching] or [Geometry, Edge Blending] is selected and the layout is configured so that either height (vertical) or width (horizontal) is more than one projector in the projector layout screen, the black level adjustment selection screen opens. Select the process for the black level of the area to be overlapped. - [Set temporary value]: Overwrite the black level value with the temporary value of the corresponding models. - [Use current settings]: Retain the current (pre-adjustment) black level value. - [Adjust using the camera]: Adjust the black level using the camera. 96
![](/manual_guide/products/panasonic-ptrz21k-geometry-manager-pro-ver40-9934ce4/96.png)