Panasonic DMC-GM5 Advanced Owners Manual - Page 86

3. Recording Modes Program Shift In Program AE Mode, you can change the preset aperture value and shutter speed without changing the exposure. This is called Program Shift. You can make the background more blurred by decreasing the aperture value or record a moving subject more dynamically by slowing the shutter speed when taking a picture in Program AE Mode. 1 Press the shutter button halfway and display the aperture value and shutter speed value on the screen. 2 While the values are displayed (about 10 seconds), perform Program Shift by rotating the rear dial. SS 250 125 60 30 15 A Program Shift indication • It will switch between Program Shift operation and F 4.0 5.6 8.0 4.0 60 0 200 98 Exposure Compensation operation (P161) every time A the rear dial is pressed while the values are displayed. • To cancel Program Shift, turn the camera off or rotate the rear dial until the Program Shift indication disappears. Program Shift is easily canceled by setting [Fn Button Set] on the [Custom] menu to [One Push AE]. (P94) Displaying/not displaying the exposure meter MENU > [Custom] > [Expo.Meter] > [ON]/[OFF] B Exposure meter • Set to [ON] to display the Exposure meter when correcting SS 250 125 60 30 15 exposure, performing Program Shift, setting aperture, and setting shutter speed. F 4.0 5.6 8.0 4.0 60 0 200 98 • Unsuitable areas of the range are displayed in red. B • When the Exposure meter is not displayed, switch the display information for screen by pressing [DISP.]. (P45) • The Exposure meter disappears after approximately 4 seconds if no operation is performed. 86