Panasonic DMC-GM5 Advanced Owners Manual - Page 265

11. Using the Wi-Fi function ∫ Changing the connection method To change the connection method, press [DISP.], and then select the connection method. When connecting with [Via Network]: On the camera 1 Select [Via Network]. • Follow the connection procedure described on P295 to connect the camera to a wireless access point. On your smartphone 2 Turn on the Wi-Fi function. 3 Connect the smartphone to the wireless access point to which the camera is connected. 4 Start "Image App". (P261) When connecting with [WPS Connection]¢ in [Direct]: On the camera 1 Select [Direct]. • Follow the connection procedure described on P297 to connect the camera to the smartphone. On your smartphone 2 Start "Image App". (P261) ¢ WPS is a function that allows you to easily set up a connection with a wireless LAN device and make security-related settings. To check whether your smartphone supports the function, refer to the operating instructions of the smartphone. ∫ Terminating the connection After use, terminate the connection to the smartphone. 1 Press [Wi-Fi] on the camera. (P258) (You can also terminate the connection by performing the following operations on the recording screen: MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes].) 2 On the smartphone, close "Image App". (If you are using an iOS device) On the screen of "Image App", press the home button to close the app. (If you are using an Android device) On the screen of "Image App", press the return button twice to close the app. 265