Panasonic DMC-GM5 Advanced Owners Manual - Page 297

11. Using the Wi-Fi function • Check the wireless access points instruction manual and settings when saving a wireless access point. • If no connection can be established, the wireless access point's radio waves may be too weak. Refer to "Message Display" (P331) and "Troubleshooting" (P344) for details. • Transmission speed may decrease, or may not be usable depending on the environment it is used in. Connecting from a location away from your house (direct connection) You can select the method for connecting to the device you are using. Select the connection method supported by your device. [Wi-Fi Direct] 1 Set the device to Wi-Fi Direct mode. 2 Select [Wi-Fi Direct]. 3 Select the device to connect to. • Read the operating instructions of your device for details. [WPS Connection] [WPS (Push-Button)] 1 Select [WPS (Push-Button)]. 2 Set the device to WPS mode. • You can wait longer for a connection by pressing the [DISP.] button on this unit. [WPS (PIN code)] 1 Select [WPS (PIN code)]. 2 Enter the PIN code of the device into this unit. [Manual Connection] Enter the SSID and password into the device. The SSID and password are displayed on the connection waiting screen of this unit. • If the destination is [Smartphone], you can set up a connection by scanning the QR code with the smartphone. (P263, 264) • If you press [MENU/SET] on the camera, the QR code will be enlarged. When it is difficult to scan the QR code, try enlarging it. 297