Panasonic DMC-FZ300 Basic Operating Manual - Page 32
Selecting a Drive Mode
View all Panasonic DMC-FZ300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Recording Button operation - Touch operation Drag Pinch in / Pinch out - Description Moves the enlarged area. Enlarges/reduces the AF area in small steps. Enlarges/reduces the AF area in large steps. - Switches the enlarged display. (windowed/full screen) [DISP.] [Reset] Resets the area to be enlarged back to the center. 5 Press the shutter button halfway • The assist screen will close. The recording screen will be displayed. • You can also exit MF Assist by pressing [MENU/SET]. Selecting a Drive Mode Recording mode: You can switch the operation to be performed when you press the shutter button. 1 Press [ ] button ( ) 2 Press to select the drive mode and press [MENU/SET] • The icons in the table are just examples. [Single] When the shutter button is pressed, only one picture is recorded. [Burst] The pictures are recorded in succession while the shutter button is pressed. [4K PHOTO] (→33) When the shutter button is pressed, a 4K photo is recorded. [Auto Bracket] Each time the shutter button is pressed, the pictures are recorded with different exposure settings based on the Exposure Compensation range. [Self Timer] When the shutter button is pressed, recording takes place after the set time has elapsed. Cannot be set when using Intelligent Auto Mode. • To cancel drive mode, select [ ] ([Single]) or [ ]. 32 SQT0946 (ENG)