Panasonic DMC-FZ300 Basic Operating Manual - Page 20
Zoom lever/Side lever Use zoom, Shutter button Taking pictures
View all Panasonic DMC-FZ300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Basics Zoom lever/Side lever (Use zoom) You can adjust the area of a picture to be taken using the zoom or side lever. Zoom lever Move the zoom lever Side lever Slide the side lever T side: Telephoto, Enlarge the subject W side: Wide-angle, Capture a wider area Turning angle is large: Zoom speed is high Turning angle is small: Zoom speed is low Slide width is large: Zoom speed is high Slide width is small: Zoom speed is low ●Do not touch the lens barrel during zooming. ●For details about zoom types and use, refer to (→35). Shutter button (Taking pictures) • Press the [ ] button ( ) to set the drive mode to [ ] ([Single]). 1 Press the shutter button halfway (press lightly) to focus on the subject • The aperture value and shutter speed are displayed. (If the aperture value and shutter speed are shown in red and flashing, you do not have the appropriate exposure, unless you are using the flash.) Focus display (When focus is aligned: illuminated When focus is not aligned: flashing) Shutter speed Aperture value 2 Press the shutter button fully (push the button all the way), and take the picture ●Pictures can be taken only when the image is correctly focused as long as the [Focus/ Release Priority] is set to [FOCUS]. ●Even during menu operation or picture playback, if you press the shutter button halfway, you can instantly set the camera ready for recording. 20 SQT0946 (ENG)