Panasonic AJ-PX800 Operating Instructions - Page 126
[recording Setup], F2.8], [f4.0], [f5.6]
View all Panasonic AJ-PX800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Item [FOCUS ASSIST MODE] [EXPAND MODE] [IRIS GAIN] [IRIS GAIN VALUE] [A.IRIS WINDOW] [AGC] [AGC LIMIT] [AGC POINT] [AUTO KNEE SW] [WFM MODE] [BARS TYPE] Chapter 6 Menu Operations - Menu list Description of settings Sets the operation mode of the focus assist function. [EXPAND]: The center of the viewfinder is displayed enlarged. [IN RED]: Outlines the contour of the video in red. ffFactory setting: [EXPAND] Selects the method to cancel expanded display when [EXPAND] is selected in [FOCUS ASSIST MODE]. [10SEC]: Cancels in 10 seconds. [HOLD]: Does not cancel until the button is pressed again. [UNTIL REC]: Cancels when recording starts. Expanded display is not available during recording. ffFactory setting: [10SEC] Sets whether to perform the iris correction on the camera or on the lens. [CAM]: Performs the iris correction on the camera. [LENS]: Performs the iris correction on the lens. ffFactory setting: [CAM] Sets the adjustment value of [IRIS GAIN]. When [CAM] is selected in [IRIS GAIN], this setting is enabled. [1]...[20] ffFactory setting: [10] Selects the auto iris detection window. [NORM1]: Window that is near screen center. [NORM2]: Window that is near screen bottom. [CENTER]: Window that is a spot in the screen center. ffFactory setting: [NORM1] Sets the operation of the auto gain control. [ON]: Performs the operation of the [AGC] function that automatically adjusts camera gain. [OFF]: Does not perform the operation of the [AGC] function that automatically adjusts camera gain. ffFactory setting: [OFF] Sets the maximum gain value during [AGC] operation. [3dB], [6dB], [12dB], [18dB] ffFactory setting: [12dB] Sets the F value to switch control from auto iris to [AGC] during [AGC] operation. [F2.8], [F4.0], [F5.6] ffFactory setting: [F2.8] Enables/disables the auto knee and dynamic range stretcher functions. [DRS]: Activates the dynamic range stretcher function when the / selector switch is set to . [ON]: Activates the auto knee function when the / selector switch is set to . [OFF]: Does not activate the auto knee and dynamic range stretcher functions when the / selector switch is set to . ffFactory setting: [ON] Selects the type of waveform to be displayed in the viewfinder when the USER button to which the [WFM] function is assigned is pressed. [WAVE]: Displays as a waveform. [VECTOR]: Displays as a vector. [WAVE/VECT]: Each time the USER button to which [WFM] is assigned is pressed, the display changes in order from (no display) → [WAVE] (waveform) → [VECTOR] (vector) → (no display). ffFactory setting: [WAVE] Selects the color bar to use. [SMPTE]: Uses the color bar in the SMPTE standard. [FULL BARS]: Uses full color bars. [SPLIT]: Uses SPLIT color bars for SNG (Satellite News Gathering). [ARIB]: Uses ARIB standard color bars. ffFactory setting: [SMPTE] [RECORDING SETUP] These are various types of setting items when performing camera recording and playback. Select the recording format. [RECORDING] [RECORDING SETTING] Item [RECORDING HOLD] [ONE SHOT TIME] [INTERVAL TIME] Description of settings Selects the recording format. [NORMAL]: Performs standard recording. [INTERVAL]: Performs interval recording. [ONE SHOT]: Performs one-shot recording. [LOOP]: Performs loop recording. ffFactory setting: [NORMAL] Selects whether to hold [RECORDING] settings. [ON]: Holds the settings. [OFF]: Does not hold the settings. It will always be [NORMAL] the next time when the power is turned on. ffFactory setting: [OFF] Sets the recording duration of one-shot recording. [1frm], [2frm], [4frm], [8frm], [16frm], [1s] ffFactory setting: [1frm] Sets the interval duration for interval recording. [2frm], [4frm], [8frm], [16frm], [1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min] ffFactory setting: [2frm] - 126 -