Panasonic AJ-PX380GF Operating Instructions - Page 85

rr Video Chapter 4 Shooting - Dual codec recording Recording mode [AVC-G6 2CH MOV] [SHQ 2CH MOV] [HQ 2CH MOV] [LOW 2CH MOV] File format MOV MOV MOV MOV Resolution 1920×1080*1 1280×720*2 960×540 640×360 480×270 352×240*3 352×288*4 Codec H.264 High Profile H.264 High Profile H.264 High Profile H.264 Baseline Profile Frame rate 30 fps/25 fps 60 fps/50 fps 30 fps/25 fps/24 fps 30 fps/25 fps 30 fps/25 fps 30 fps/25 fps *1 When [LINE&FREQ] is [1080‑59.94i] or [1080‑50i] *2 When [LINE&FREQ] is [720‑59.94P] or [720‑50P] *3 480/59.94i mode *4 576/50i mode rr Audio Recording mode [AVC-G6 2CH MOV] [SHQ 2CH MOV] [HQ 2CH MOV] [LOW 2CH MOV] File format MOV MOV MOV MOV Codec AAC‑LC LPCM AAC‑LC AAC‑LC Number of channels 2ch 2ch 2ch 2ch Bitrate per channel 64 kbps 768 kbps 64 kbps 64 kbps Bitrate 6 Mbps 3 Mbps 3500 kbps 1500 kbps 800 kbps Sampling frequency 48 kHz 48 kHz 48 kHz 48 kHz Recording the proxy data Select [PROXY REC(P2)] or [PROXY REC(P2&SD)] in main menu → [RECORDING SETUP] → [DUAL CODEC SETTING] → [CODEC USAGE] and press the button to start proxy recording at the same time as recording of the materials. Push the switch towards the side twice to display the proxy data recording information on the viewfinder. Recording to the SD memory card To record the proxy data, use SD, SDHC, or SDXC memory cards with an indication of class2 or higher. Refer to our support desk at the following website for the latest information not included in these operating instructions. http://pro-av.panasonic.net/ When recording the proxy data to an SD memory card, always format the card using the camera. Checking the SD memory card 1 Insert the SD memory card into the camera. 2 Select the main menu → [CARD FUNCTIONS] → [SD CARD PROPERTY]. ffThe format status is displayed in [SD STANDARD]. If [NOT SUPPORTED] is displayed, format the card with the camera. ffIn the [PROXY REM] item, check the remaining recording time of the proxy data. The remaining SD memory card capacity displayed ([PROXY REM]) indicates the remaining proxy recording, but it may differ from the actual available space. If short recordings are repeated, the available recording time may decrease significantly compared to the available space. When the remaining capacity exceeds 999 min, [999min] is displayed. If the proxy is not recorded to the SD memory card, the remaining time is not displayed. ffIn the [NUMBER OF CLIPS] item, check the number of clips recorded in the SD memory card. If the number of clips is 1000 or more, no additional proxy data can be recorded to the SD memory card even if there is available capacity. ffShot marks and text memos cannot be added to the clips in the SD memory card, ffDeleting the clips recorded on the P2 card on the thumbnail screen does not delete the proxy data recorded on the SD memory card. @@NOTE tt While recording is performed to the SD memory card, the remaining capacity can be checked also with the mode check on the viewfinder. tt If proxy data cannot be recorded to the SD memory card, even when the main menu → [RECORDING SETUP] → [DUAL CODEC SETTING] → [CODEC USAGE] → [PROXY REC(P2&SD)] is set, [SD WR ERR] is displayed. In this case, check the SD memory card. For details, refer to "Error displays about proxy data recordings" (page 87). tt Data deleted as a result of formatting cannot be restored. Always check the data before formatting. Formatting SD memory cards 1 Insert the SD memory card into the camera. 2 Select [YES] in the main menu → [CARD FUNCTIONS] → [FORMAT SD CARD]. This completes formatting the SD memory card. - 85 -