NordicTrack Rw600 Instruction Manual - Page 8
Tip: Avoid pinching the wires., start all the Screws, and then tighten them., Avoid, pinching,
 |
View all NordicTrack Rw600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Slide the Seat (23) to the front of the Rail (2). Next, attach a Stop (32) to each side of the Rail (2) with an M4 x 19mm Screw (69). Then, attach the Rail Cap (38) to the Rail (2) with two M4 x 19mm Screws (69). 5 69 32 23 2 69 69 38 32 69 6. While a second person holds the Upright (77) near the Frame (1), connect the Neck Wire (112) 6 to the Main Wire (84). Tip: Avoid pinching the wires. Attach the Upright (77) to the Frame (1) with four M8 x 35mm Screws (82); start all the Screws, and then tighten them. 82 77 Avoid 112 pinching 84 1 the wires 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
8
5.
Slide the Seat (23) to the front of the Rail (2).
Next, attach a Stop (32) to each side of the Rail
(2) with an M4 x 19mm Screw (69).
Then, attach the Rail Cap (38) to the Rail (2)
with two M4 x 19mm Screws (69).
6.
While a second person holds the Upright (77)
near the Frame (1), connect the Neck Wire (112)
to the Main Wire (84).
Tip: Avoid pinching the wires.
Attach
the Upright (77) to the Frame (1) with four
M8 x 35mm Screws (82);
start all the Screws,
and then tighten them.
2
5
6
38
69
69
32
32
23
69
82
69
Avoid
pinching
the wires
84
112
77
1