Nikon Z 7 Reference Manual for customers in Asia Oceania the Middle East and A - Page 436

1 Not available with spot metering. 2 Can also be selected with flash unit. 3 qA/A mode selection performed on flash unit using custom settings. 4 Can only be selected using the camera Flash control option. 5 Available only during close-up photography. 6 Choice of qA and A depends on the option selected with the master flash. 7 Supports the same features as remote flash units with optical AWL. 8 Available only in i-TTL, qA, A, GN, and M flash-control modes. 9 Available only in i-TTL flash control mode or when the flash is set to emit monitor pre-flashes in qA or A flash control mode. 10 Firmware updates for the SB-910 and SB-900 can be performed from the camera. The SU-800 Wireless Speedlight Commander When mounted on a CLS-compatible camera, the SU-800 can be used as a commander for SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, SB-500, or SB-R200 flash units in up to three groups. The SU-800 itself is not equipped with a flash. A Modeling Illumination Pressing the control to which Preview has been assigned using Custom Setting f2 (Custom control assignment) causes CLScompatible flash units to emit a modeling flash. This feature can be used with Advanced Wireless Lighting to preview the total lighting effect achieved with multiple flash units; the effect is best viewed by looking directly at the subject rather than at the camera display. Modeling illumination can be turned off using Custom Setting e5 (Modeling flash). A Studio Strobe Lighting To adjust the color and brightness of the view through the lens so that shots are easier to frame, select Off for Custom Setting d8 (Apply settings to live view). 412 Technical Notes