Netgear UTM25-100NAS Reference Manual - Page 364

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual 2. Enter the settings as explained in Table 11-2. Table 11-2. E-mail Notification Settings Setting Description (or Subfield and Description) Show as mail sender SMTP server This server requires authentication Send notifications to A descriptive name of the sender for e-mail identification purposes. For example, enter UTM25Notifications. The IP address and port number or Internet name and port number of your ISP's outgoing e-mail SMTP server. The default port number is 25. Note: If you leave this field blank, the UTM cannot send e-mail notifications. If the SMTP server requires authentication, select the This server requires authentication checkbox and enter the following settings: User name The user name for SMTP server authentication. Password The password for SMTP server authentication. The email address to which the notifications should be sent. Typically, this is the e-mail address of the administrator. 3. Click Test to ensure that the connection to the server and e-mail address succeeds. 4. Click Apply to save your settings. Configuring and Activating System, E-mail, and Syslog Logs You can configure the UTM to log system events such as a change of time by an NTP server, secure login attempts, reboots, and other events. You can also send logs to the administrator or schedule logs to be sent to the administrator or to a syslog server on the network. In addition, the Email and Syslog screen provides the option to selectively clear logs. To configure and activate logs: 1. Select Monitoring > Logs & Reports from the menu. The Logs & Reports submenu tabs appear, with the Email and Syslog screen in view (see Figure 11-4 on page 11-7). 11-6 Monitoring System Access and Performance v1.0, September 2009