Netgear UTM25-100NAS Reference Manual - Page 259
Configuring the ProSafe VPN Client for Mode Config Operation
![]() |
UPC - 606449061383
View all Netgear UTM25-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual Table 7-16. Add IKE Policy Settings for a Mode Config Configuration (continued) Item Description (or Subfield and Description) Extended Authentication XAUTH Configuration Note: For more information about XAUTH and its authentication modes, see "Configuring XAUTH for VPN Clients" on page 7-38. Select one of the following radio buttons to specify whether or not Extended Authentication (XAUTH) is enabled, and-if enabled-which device is used to verify user account information: • None. XAUTH is disabled. This the default setting. • Edge Device. The UTM functions as a VPN concentrator on which one or more gateway tunnels terminate. The authentication mode that is available for this configuration is User Database, RADIUS PAP, or RADIUS CHAP. • IPSec Host. The UTM functions as a VPN client of the remote gateway. In this configuration the UTM is authenticated by a remote gateway with a user name and password combination. Authentication Type For an Edge Device configuration: from the pull-down menu, select one of the following authentication types: • User Database. XAUTH occurs through the UTM's user database. Users must be added through the Add User screen (see "User Database Configuration" on page 7-39). • Radius PAP. XAUTH occurs through RADIUS Password Authentication Protocol (PAP). The local user database is first checked. If the user account is not present in the local user database, the UTM25 connects to a RADIUS server. For more information, see "RADIUS Client Configuration" on page 7-39. • Radius CHAP. XAUTH occurs through RADIUS Challenge Handshake Authentication Protocol (CHAP). For more information, see "RADIUS Client Configuration" on page 7-39. Username The user name for XAUTH. Password The password for XAUTH. 9. Click Apply to save your settings. The IKE policy is added to the List of IKE Policies table. Configuring the ProSafe VPN Client for Mode Config Operation From a client PC running NETGEAR ProSafe VPN Client software, configure the remote VPN client connection for Mode Config operation: 1. Right-click on the VPN client icon in your Windows toolbar, select Security Policy Editor. Then, select Options > Secure, and verify that the Specified Connections selection is enabled (see Figure 7-11 on page 7-12). Virtual Private Networking Using IPsec Connections v1.0, September 2009 7-49
![](/manual_guide/products/netgear-utm25100nas-reference-manual-87aaf49/259.png)