Marantz NR1200 Owners Manual - Page 159
No sound comes out
View all Marantz NR1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Contents Connections Playback Settings Tips Appendix No sound comes out No sound comes out of speakers. 0 This unit supports analog audio signals and PCM 2-channel signals. To play sources such as Dolby Digital discs, set "PCM 2ch" as the audio format in the audio device settings. 0 Check the connections for all devices. (v p. 26) 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (v p. 26) 0 Securely tighten the speaker terminals. Check speaker terminals for looseness. (v p. 26) 0 Check that a proper input source is selected. (v p. 47) 0 Adjust the volume. (v p. 48) 0 Cancel the mute mode. (v p. 48) 0 Check the digital audio input connector setting. (v p. 125) 0 Check the digital audio output setting on the connected device. On some devices, the digital audio output is set to off by default. 0 When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the speaker terminal and PRE OUT connector. 0 Check the settings for the SPEAKERS button. No sound comes out when using the DVI-D connection. 0 When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a separate audio connection. Front panel Display Rear panel 159 Remote Index