Marantz NR1200 Owners Manual - Page 127

Contents Connections Playback Settings Tips Appendix o INPUT MODE Set the audio input modes for each input source. It is normally recommended to set the audio input mode to "AUTO". AUTO (Default): Automatically detect input signal and perform playback. HDMI: Play only signals from HDMI input. DIGITAL: Play only signals from digital audio input. ANALOG: Play only signals from analog audio input. o Set Defaults The "Input Assign" settings are returned to the default settings. 0 This unit supports analog audio signals and PCM 2-channel signals. To connect devices with the HDMI and DIGITAL connectors, set "PCM 2ch" as the audio format in the audio device settings. 0 When digital signals are properly input, the ~ indicator lights on the display. If the ~ indicator does not light, check "Input Assign" and the connections. (v p. 125) 0 If "HDMI Control" is set to "On" and a TV compatible with the ARC is connected via the HDMI MONITOR connectors, the input mode whose input source is "TV Audio" is fixed to ARC. Front panel Display Rear panel 127 Remote Index