Magic Chef MCSRG24S User Manual 1 - Page 17
How to Convert Gas Pressure Regulator Natural Gas to LP Gas
View all Magic Chef MCSRG24S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
caution: Failure to follow instructions could result in serious injury. Shut-Off the Range 1. Turn the manual shut-off valve to the closed position. 2. Unplug range or disconnect power. To Range Manual Shut-Off Valve Figure 18 "Closed" Position Gas Supply Line How to Convert Gas Pressure Regulator (Natural Gas to LP Gas) a. Plastic cover b. Gas pressure regulator cap with solid end facing out c. Gas pressure regulator cap with hollow end b facing out a d. Washer e. Gas pressure regulator cap de Section View de Figure 19 e e c a Section View 1. Remove plastic cover from gas pressure regulator cap. 2. Turn gas pressure regulator cap counter-clockwise with a 5/8" wrench to remove. note: Do not remove the spring beneath the cap. 3. Remove the retainer pin that is currently positioned for use with Natural Gas. 4. Turn the retainer pin upside down and re-install into the regulator cap. It is now positioned for use with LP Gas. 5. Screw the regulator cap back into the regulator and reattach the regulator to the nipple and flare union. How to Convert Gas Pressure Regulator (Natural Gas to LP Gas) 1. Remove the burner grates, burner caps and burner heads. 2. Using a 7 mm nut driver, remove the burner orifices. 3. Install the proper orifices in replace of the ones that were removed. 4. Re-install the burner bases, heads and top grates. Make sure the burner caps are properly seated on the burner heads. Orifieces Figure 20 Triple Ring Burner 5 Orifices 17 Auxiliary Burner, Semi-Rapid Burner, Repid Burner: 1 Orifiece Each