LiftMaster LJ8900W LJ8900W Manual English French - Page 5
Carton Inventory, Hardware, Additional Items You May Need, Automatic door lock Model 841LM - installation manual
View all LiftMaster LJ8900W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Introduction Carton Inventory Your door operator is packaged in one carton which contains the motor unit and the parts illustrated below. If anything is missing, carefully check the packing material. Single Button Control Station Door Operator 2 Conductor Bell Wire White and White/Red The Protector System (2) Safety Reversing Sensors (1 Sending Sensor and 1 Receiving Sensor) with 2-Conductor White and White/Black Bell Wire attached Collar with Set Screws Cable Tension Monitor with 2-Conductor Green/White Bell Wires Hardware Screw #10-32 (2) Screw 14-10x2" (4) Handle Mounting Bracket Safety Reversing Sensor Bracket (2) Safety Labels and Literature Rope Screw 1/4"-20x1/2" (2) Carriage Bolt 1/4"-20x1/2" (2) Wing Nut 1/4"-20 (2) Additional Items You May Need Extension brackets (Model 041A5281-1) or wood blocks: Depending upon building construction, extension brackets or wood blocks may be needed to install the safety reversing sensor. Fastening hardware: Alternate floor mounting of the safety reversing sensor will require hardware not provided. 90˚ connector for cable conduit or flex cable adapter: Required for permanent wiring. Battery Backup (Model 485LM): Provides backup power to the door operator. Automatic door lock (Model 841LM): The automatic door lock is used to prevent the door from being manually opened once the door is fully closed. 5