LiftMaster LJ8900W LJ8900W Manual English French - Page 24
Programming, Remote Control (Not Provided), To Erase the Memory
View all LiftMaster LJ8900W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Programming Remote Control (Not Provided) Up to 40 Security+ 2.0 remote controls can be programmed to the door operator. Older LiftMaster remote controls are NOT compatible, see page 30 for compatible accessories. To program additional accessories refer to the instructions provided with the accessory or visit LiftMaster.com. If your vehicle is equipped with a Homelink®, you may require an external adapter depending on the make, model, and year of your vehicle. Visit www.homelink.com for additional information. To Erase the Memory ERASE ALL REMOTE CONTROLS AND KEYLESS ENTRIES 1. Press and hold the LEARN button on door operator until the learn LED goes out (approximately 6 seconds). All remote control and keyless entry codes are now erased. Reprogram any accessory you wish to use. ERASE ALL DEVICES (INCLUDING myQ ENABLED ACCESSORIES) 1. Press and hold the LEARN button on door operator until the learn LED goes out (approximately 6 seconds). 2. Immediately press and hold the LEARN button again until the learn LED goes out. All codes are now erased. Reprogram any accessory you wish to use. ERASE THE Wi-Fi NETWORK FROM THE DOOR OPERATOR Press and hold the black adjustment button until 3 beeps are heard (approximately 6 seconds). ERASE A myQ ACCOUNT Go to myLiftMaster.com to delete your myQ account. Black Adjustment Button LEARN Button 24