LiftMaster EL25 EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 8

Enter Programming Mode

Get LiftMaster EL25 PDF manuals and user guides View all LiftMaster EL25 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Programming Single Unit Overview Programming Single Unit Overview *** Enter Programming Mode If you will be programming the unit via modem, please refer to the Versa XS online help. Important: After entering programming mode for the first time, we suggest you change the password to maintain the security of your system. 1 From the EL25 Keypad: 1 Press 2 Enter the (6) six-digit password. The default is six zeroes. The unit is now ready to accept programming instructions! 2 Short Beeps 2 From the Residence Telephone: 1 When you hear the dial tone, press 1A If multiple EL25 units are sharing the same phone line, then a Unit ID Code (1-7) will need to be entered at this time. 2 Enter the (6) six-digit password. The default is six zeroes. 3 Press and the tone will stop. The unit is now ready to accept programming instructions! 2 From the Remote Telephone: 1 Dial the unit's phone number. Note: If the EL25 and an answering machine (or answering service) utilize the same phone line, let the line ring at least (2) two times, hang-up, and call back within one (1) minute. The EL25 will answer on the second call. If the unit does not answer, you may need to change the ring count. 2 When the EL25 picks up the call, you will hear 2 beeps. 3 Press 3A If multiple EL25 units are sharing the same phone line, then a Unit ID Code (1-7) will need to be entered at this time. 4 Enter the (6) six-digit password. The default is six zeroes. 5 Press and the beeps will stop. The unit is now ready to accept programming instructions! • Press • Press Exit Programming Mode 0 on the EL25 keypad and the unit will respond with 3 short beeps when disconnecting. on the telephone and the unit will respond with 3 short beeps when disconnecting. Press when using a telephone or the EL25 to cancel programming sequence and exit programming mode. Page 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
Page 7
Enter Programming Mode
Exit Programming Mode
1
Press
2
Enter the (
6
) six-digit password. The default is six zeroes.
If you will be programming the unit via modem, please refer to the
Versa XS
online help.
After entering programming mode for the first time, we suggest you change
the password to maintain the security of your system.
Important:
The unit is now ready to accept programming instructions!
1
When you hear the dial tone, press
If multiple EL25 units are sharing the same phone line, then a
Unit ID Code (1-7)
will need
to be entered at this time.
1
Dial the unit's phone number.
2
When the EL25 picks up the call, you will hear
2
beeps.
3
Press
The unit is now ready to accept programming instructions!
1A
3A
If multiple EL25 units are sharing the same phone line, then a
Unit ID Code
(
1-7
) will need
to be entered at this time.
2
Enter the (
6
) six-digit password. The default is six zeroes.
3
Press
and the tone will stop.
The unit is now ready to accept programming instructions!
4
Enter the (
6
) six-digit password. The default is six zeroes.
5
Press
Press
on the EL25 keypad and the unit will respond with
3 short beeps
when disconnecting.
Press
on the
telephone
and the unit will respond with
3 short beeps
when disconnecting.
and the beeps will stop.
Note:
If the EL25 and an answering machine (or answering service) utilize the same phone line, let the line
ring at least (
2
) two times, hang-up, and call back within one (
1
) minute. The EL25
will answer on the
second call. If the unit does not answer, you may need to change the ring count.
Press
when using a
telephone
or the EL25 to cancel
programming sequence and exit programming mode.
•
•
Programming Single Unit Overview
0
***
From the Remote Telephone:
From the Residence Telephone:
From the EL25 Keypad:
2 Short Beeps
1
2
2