Kenwood DPX-5000BT Operation Manual - Page 13
Connect with a remote device by One-touch, BLUETOOTH - Mobile phone, Receive a call
View all Kenwood DPX-5000BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
BLUETOOTH® Connect with a remote device by One-touch (NFC) Near Field Communication (NFC) enables short-range wireless communication between the unit and remote devices. By holding an NFC-compatible remote device near to the N-Mark on the unit, the unit and remote device proceed to complete pairing and established the BLUETOOTH connection automatically. 1 Activate the NFC function on the remote device. Refer to the instruction manual of the remote device for more information. 2 Hold the remote device near to the N-Mark on the unit. The device vibrates when pairing is completed. BLUETOOTH - Mobile phone Receive a call When there is an incoming call: • ZONE 2 illuminates in green color and flashes. • The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 14) During a call: • The display illuminates according to the settings made for [DISPLAY] ( illuminates in green color. • If you turn off the unit, the Bluetooth connection is disconnected. 21) and ZONE 2 The following operations may differ or not available depending on the connected phone. • To disconnect, hold the remote device near to the N-Mark on the unit again. • This unit only can recognize and connect to one NFCcompatible device at a time. To First incoming call... Answer a call Reject a call End a call On the faceplate Press or the volume knob or one of the number buttons (1 to 6). Press . Press . On the remote control Press . Press . Press . ENGLISH 13