Kenmore 35922 Owners Manual - Page 9

When the unit is running with normal air flow, the light on the performance indicator is off. The light comes on whenever the airflow becomes blocked. If that occurs, check the disposable dust bag, motor safety filter and other possible clog locations shown in CLOG REMOVAL. iti!ili!ii I /ii/i i i i i i i i i i Your Kenmore vacuum cleaner features a two (2) speed, direct drive agitator for cleaning a variety of floor surfaces. Please review the table below before using your vacuum cleaner. 1. Do not use the CARPET setting (high speed) for cleaning berber style carpet. The high agitator speed could damage the carpet or cause excessive carpet wear. 2. Use the GENTLE setting (low speed) ONLYfor berber or delicate @ pile carpeting. The agitator may slow down or stop on thick carpeting, area rugs or throw rugs. If agitator stops and does not restart, see page 13, AGITATOR MOTOR OVERLOAD PRO- TECTOR. 3. The FLOOR setting may be used for all indoor bare floors including wood, tile, linoleum, slate etc. Touch Control Setting Carpet (1) Gentle !2) Floor (3) Agitator Speed Low off Bare Floor € Commercial or Low Pile Berber or Delicate Carpet Plush Shag 7 Area Rug To select a pile height setting: Turn off vacuum cleaner. Select a pile height setting by tilting the cleaner back until the front wheels are lifted slightly off the floor. Slide the adjustment lever to the correct setting. There are four (4) pile height settings on the vacuum cleaner. Use the LOW setting for most low-pile carpets and bare floor cleaning (with agitator OFF), and the HIGH setting for high-pile carpets like shag carpet, scatter rugs, etc. Use the other settings as needed for carpet heights in between. CAUTION Do not allow vacuum cleaner to remain in one spot for any length of time when the agitator is turning. Damage to carpet may occur,