Invacare SPREEGT Owners Manual - Page 16
Stability - All Models Except Recliners, Stability - Recliner Models Only
View all Invacare SPREEGT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
SECTION 1-GENERAL GUIDELINES BACK HEIGHT SEAT DEPTH BACK ANGLE SEATING SYSTEM TILT ANGLE CASTER SIZE CASTER POSITION WHEEL SIZE WHEEL POSITION USER CONDITION WHEEL LOCKS ANTI-TIPPERS LOCKING COLLAR NOTE: When changes to the left hand column occur, follow across the chart and refer to the X procedure to maintain the proper stability, safety and handling of the wheelchair. BACK HEIGHT • X X X X X X X X N/A N/A N/A N/A SEAT DEPTH X • X X N/A X X X X N/A N/A N/A X BACK ANGLE X X • X X X X X X N/A N/A N/A X SEATING SYSTEM X X X • X X X X X X N/A N/A X TILT ANGLE N/A N/A X N/A • N/A N/A N/A N/A N/A N/A N/A X CASTER SIZE X N/A X N/A N/A • X X X N/A X X X CASTER POSITION X N/A X N/A N/A X • X X N/A X X X WHEEL SIZE X N/A X N/A N/A X X • X N/A X X X WHEEL POSITION X N/A X N/A N/A X X X • N/A X X X USER CONDITION X X X X X X X X X • N/A N/A N/A SEAT HEIGHT X N/A X X X X X X X N/A X X X Stability - All Models Except Recliners To maintain maximum stability, position the rear wheel axle mounting brackets in the most rearward position. Moving the rear wheels to any of the other mounting positions causes the wheelchair to decrease in stability. If moving the rear wheel axle mounting brackets to any forward position, ensure the wheelchair is stable before using. ALWAYS ensure stability before using maximum amount of tilt-in-space or moving the rear wheel axle mounting brackets forward. Test wheelchair before it is occupied by the end user to ensure safety. Stability - Recliner Models Only Before using ANY recline position of this wheelchair, make sure the rear wheel axle mounting brackets are in the most rearward position in the axle mounting plate to maintain the stability of the wheelchair. DO NOT change the handling/maneuverability of the wheelchair by moving the rear wheel axle mounting brackets to ANY of the forward positions. Moving the rear wheel axle mounting brackets to ANY of the forward positions WILL change the center of gravity of the wheelchair, making the wheelchair less stable. ALWAYS make sure that the wheelchair is stable both in the full reclined (back at 180°) position and the full upright (back at 90°) position before using the recliner option. Before using the recliner option, make sure the anti-tipper wheel assemblies are in the lowest adjustment hole (adjustment hole closest to the ground/floor). Solara®/Spree GT™ 16 Part No 1125027