Invacare PROX4S Owners Manual - Page 56
Back
View all Invacare PROX4S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
SECTION 9-BACK SECTION 9-BACK ƽ WARNING After ANY adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. Removing/Installing the Back Canes NOTE: For this procedure, refer to FIGURE 9.1. Removing the Back Cane NOTE: Reverse this procedure to install the back canes. 1. Remove the back upholstery or back/ seating system from the wheelchair. Refer to Removing/Installing the Standard Back Upholstery on page 59, Adjustable Back Upholstery on page 60 or the owner's manual shipped with the back/seating system. Locknuts Back Cane Back Cane Mounting Bracket 2. Remove the arms from the wheelchair. Refer to Arms on page 47. 3. Remove the two mounting screws and locknuts that secure the bottom of the back cane to the back cane mounting bracket. 4. Lift up and remove the back cane from the wheelchair. Mounting Screws 5. If necessary, repeat STEPS 3‐4 to remove the remaining back cane. 6. Reverse STEPS 1‐5 to install the new back cane. FIGURE 9.1 Removing/Installing the Back Canes ProSPIN™ X4™ 56 Part No 1125104