Invacare PROX4S Owners Manual - Page 51

Adjusting T-Arm Width, Adjusting T-Arm Depth

Get Invacare PROX4S PDF manuals and user guides View all Invacare PROX4S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

SECTION 8-ARMS Adjusting T-Arm Width NOTE: For this procedure, refer to FIGURE 8.5. 1. Remove the two mounting screws that secure the arm pad to the arm tube. 2. Turn the arm pad around and reposition the arm pad on the arm tube. 3. Re‐secure the arm pad to the arm tube with the two mounting screws. Tighten securely. 4. Repeat for the opposite side, if necessary. Arm Pad Arm Tube Mounting Screw Mounting Screw FIGURE 8.5 Adjusting T-Arm Width Adjusting T-Arm Depth NOTE: For this procedure, refer to FIGURE 8.6. 1. Remove the two mounting screws that secure the arm pad to the arm tube. 2. Remove the two short mounting screws that secure the arm tube to the T‐arm post. 3. Reposition the arm tube on the T‐arm post to one of the following positions: • Desk Length Arms ‐ to one of three positions depending on the desired arm pad depth. • Full Length Arms ‐ to one of five positions depending on the desired arm pad depth. NOTE: Two additional positions are obtainable by turning the arm tube 180°. 4. Re‐secure the arm tube to the T‐arm post with the two socket screws. Torque to 60‐70 in.‐lbs. 5. Reattach the arm pad to the arm tube with the two mounting screws. Tighten securely. Arm Pad Short Mounting Screws Arm Tube Mounting Screw T-Arm Post Mounting Screw FIGURE 8.6 Adjusting T-Arm Depth 6. Repeat for the opposite side, if necessary. Part No 1125104 51 ProSPIN™ X4™

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
SECTION 8—ARMS
Part No 1125104
51
ProSPIN™ X4™
Adjusting T-Arm Width
NOTE: For this procedure, refer to FIGURE 8.5.
1.
Remove the two mounting screws that
secure the arm pad to the arm tube.
2.
Turn the arm pad around and
reposition the arm pad on the arm tube.
3.
Re
‐
secure the arm pad to the arm tube
with the two mounting screws. Tighten
securely.
4.
Repeat for the opposite side, if
necessary.
FIGURE 8.5
Adjusting T-Arm Width
Adjusting T-Arm Depth
NOTE: For this procedure, refer to FIGURE 8.6.
1.
Remove the two mounting screws that secure the arm pad to the arm tube.
2.
Remove the two short mounting screws that secure the arm tube to the T
‐
arm post.
3.
Reposition the arm tube on the T
‐
arm post to one of the following positions:
•
Desk Length Arms
‐
to one of three
positions depending on the desired
arm pad depth.
•
Full Length Arms
‐
to one of five
positions depending on the desired
arm pad depth.
NOTE: Two additional positions are obtainable
by turning the arm tube 180°.
4.
Re
‐
secure the arm tube to the T
‐
arm
post with the two socket screws.
Torque to 60
‐
70 in.
‐
lbs.
5.
Reattach the arm pad to the arm tube
with the two mounting screws. Tighten
securely.
6.
Repeat for the opposite side, if
necessary.
FIGURE 8.6
Adjusting T-Arm Depth
Mounting
Screw
Arm Tube
Mounting
Screw
Arm Pad
Short
Mounting
Screws
Arm Pad
Mounting
Screw
T-Arm Post
Arm Tube
Mounting Screw