Invacare ORBITB Owners Manual - Page 44

Adjusting T-Arm Depth

Get Invacare ORBITB PDF manuals and user guides View all Invacare ORBITB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

SECTION 6-ARMS 2. Rotate the arm pad 180o and reposition the arm pad on the arm tube. 3. Re‐secure the arm pad to the arm tube with the two mounting screws. Securely tighten. 4. Repeat STEPS 1‐3 for the opposite side, if necessary. Arm Pad Arm Tube Mounting Screw Mounting Screw FIGURE 6.4 Adjusting the T-Arms - Adjusting T-Arm Width Adjusting T-Arm Depth NOTE: For this procedure, refer to FIGURE 6.5 on page 45. 1. Remove the two mounting screws that secure the arm pad to the arm tube. 2. Remove the two mounting screws that secure the arm tube to the T‐arm post. 3. Reposition the arm tube on the T‐arm post: A. Desk Length Arms ‐ to one of three positions depending on the desired arm pad depth. B. Full Length Arms ‐ to one of five positions depending on the desired arm pad depth. NOTE: Additional positions are obtainable by turning the arm tube 180o. 4. Re‐secure the arm tube to the T‐arm post with the two mounting screws. Securely tighten. 5. Reattach the arm pad to the arm tube with the two mounting screws. Securely tighten. 6. Repeat STEPS 1‐5 for the opposite side, if necessary. Orbit™ 44 Part No. 1073955

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
SECTION 6—ARMS
Orbit
™
44
Part No. 1073955
2.
Rotate the arm pad 180
o
and reposition the arm pad on the arm tube.
3.
Re
‐
secure the arm pad to the arm tube with the two mounting screws. Securely
tighten.
4.
Repeat STEPS 1
‐
3 for the opposite side, if necessary.
FIGURE 6.4
Adjusting the T-Arms - Adjusting T-Arm Width
Adjusting T-Arm Depth
NOTE: For this procedure, refer to FIGURE 6.5 on page 45.
1.
Remove the two mounting screws that secure the arm pad to the arm tube.
2.
Remove the two mounting screws that secure the arm tube to the T
‐
arm post.
3.
Reposition the arm tube on the T
‐
arm post:
A. Desk Length Arms
‐
to one of three positions depending on the desired arm pad
depth.
B. Full Length Arms
‐
to one of five positions depending on the desired arm pad
depth.
NOTE: Additional positions are obtainable by turning the arm tube 180
o
.
4.
Re
‐
secure the arm tube to the T
‐
arm post with the two mounting screws. Securely
tighten.
5.
Reattach the arm pad to the arm tube with the two mounting screws. Securely tighten.
6.
Repeat STEPS 1
‐
5 for the opposite side, if necessary.
Mounting
Screw
Arm Tube
Mounting
Screw
Arm Pad