HP R1.5 UPS R1500 XR Models User Guide - Page 31
Replacing Batteries, Preparing the UPS, Removing the Battery Pack
View all HP R1.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Battery Maintenance Replacing Batteries There are two options for replacing UPS batteries: • Powering down the UPS before removing the batteries • In certain circumstances, replacing the batteries without powering down the UPS CAUTION: While replacing the batteries without powering down the UPS, the UPS is not protected in the event of a utility power failure. Preparing the UPS Batteries can be replaced without powering down the UPS if the UPS is not supplying battery power to devices (utility is present, indicating that the UPS is supplying utility power). To replace batteries with the UPS powered down: 1. Shut down all load devices. 2. Press the Standby button to take the UPS out of Operate mode. 3. Disconnect the UPS from utility power. 4. Wait at least 60 seconds while the UPS internal circuitry discharges. Removing the Battery Pack To remove the battery pack: 1. Remove the UPS front bezel by pulling on both ends (1). 1 Figure 4-2: Removing the UPS front bezel HP Uninterruptible Power System R1500 XR Models User Guide 4-3