HP PageWide Pro 750 Air Flow Repair Kit Install Guide - Page 5
For an MFP, For an SFP
 |
View all HP PageWide Pro 750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3 Remove the formatter, formatter cage, and back plate NOTE: This step is for the PW765/780/785. For all other models, skip this step and go to step 4. 3.1 1 2 Loosen two thumbscrews (callout 1) and then lift up on the formatter cage cover (callout 2) to remove it. 3.2 Do one of the following: a) For an MFP: Disconnect all of the connectors, and then pass the wire harnesses and cables through the openings in the formatter cage. b) For an SFP: Disconnect all of the connectors, and then pass the wire harnesses and cables through the openings in the formatter cage. 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
 |
 |
1
2
5
3.1
3.2
Loosen two thumbscrews (callout 1) and then lift up on the formatter cage
cover (callout 2) to remove it.
a)
For an MFP:
Disconnect all of the connectors,
and then pass the wire harnesses and cables through the openings in
the formatter cage.
b)
For an SFP:
Disconnect all of the connectors,
and then pass the wire harnesses and cables through the openings in
the formatter cage.
Do one of the following:
3
Remove the formatter, formatter cage, and back plate
NOTE
:
This step is for the PW765/780/785. For all other models, skip this step and go to
step 4
.