Harman Kardon AVR 135 Owners Manual - Page 8

REAR-PANEL CONNECTIONS minal is the positive, or "+," terminal that should be connected to the red (+) terminal on the Surround Back speaker with older color-coding. Connect the black (-) terminal on the AVR to the matching black negative (-) terminal on the surround back speaker. (See page 12 for more information on speaker polarity.) • Surround Speaker Outputs: Connect these outputs to the matching + and - terminals on your surround channel speakers. In conformance with the CEA color-code specification, the blue terminal is the positive, or "+," terminal that should be connected to the red (+) terminal on the Surround Left speaker with older color-coding, while the gray terminal should be connected to the red (+) terminal on the Surround Right speaker with the older color-coding. Connect the black (-) terminal on the AVR to the matching black negative (-) terminals for each surround speaker. (See page 12 for more information on speaker polarity.) ª Center Speaker Outputs: Connect these outputs to the matching + and - terminals on your center channel speaker. In conformance with the CEA color-code specification, the green terminal is the positive, or "+," terminal that should be connected to the red (+) terminal on speakers with the older colorcoding. Connect the black (-) terminal on the AVR to the black (-) terminal on your speaker. (See page 12 for more information on speaker polarity.) , Component Video Monitor Outputs: Connect these outputs to the component video inputs of a video projector or monitor. When a source connected to one of the Component Video Inputs ⁄¤ is selected, the signal will be sent to these jacks. ⁄ Video 2 Component Video Inputs: Connect the Y/Pr/Pb component video outputs of an HDTV set-top converter, satellite receiver or other video source device with component video outputs to these jacks. ¤ DVD Component Video Inputs: Connect the Y/Pr/Pb component video outputs of a DVD player to these jacks. ‹ AC Power Cord: Connect the AC power cord to a non-switched AC wall outlet. › Switched AC Accessory Outlet: These outlets may be used to power any device you wish to have turned on when the AVR 135 is turned on. fi Unswitched AC Accessory Outlet: This outlet may be used to power any AC device. The power will remain on at this outlet regardless of whether the AVR 135 is on or off. NOTE: The total power consumption of all devices connected to the accessory outlets should not exceed 100 watts. fl Optical Digital Audio Output: Connect this jack to the optical digital input connector on a CD-R/RW, MiniDisc or other digital recorder. h DVD Audio/Video Inputs: Connect the composite video and L/R analog audio outputs of a DVD player or other video source to these jacks. ‡ Coaxial Digital Audio Output: Connect this jack to the coaxial digital input of a CD-R/RW, MiniDisc or other digital recorder. i Video 1 Audio/Video Inputs: Connect the composite or Video and L/R analog audio PLAY/OUT jacks of a VCR or other video source to these jacks. ° S-Video Monitor Output: If any of the input sources used in your system have S-video49con4n7ec4-5 43 tions to the AVR, connect this jack to the S4-8vide4o6 in4p4ut 42 on your television, projector or other video3d5isp3la7y. 39 41 34 36 38 40 · Coaxial Digital Audio Inputs: Conne3c3t th2e6co2ax5 37 digital output from a DVD player, HDTV rece3iv2er, 2L7D 24 36 player or CD player to these jacks. The sign3a1l ma2y8be23a 35 Dolby Digital signal, DTS signal or a standar3d0PC2M9 di2g2ital 34 source. Do not connect player to these jacks. the RF digital outp22u89t o3f 0an2L1D 31 20 33 32 a DVD S-Video Input: Connect the S-video output of a DVD player or other video source to this jack. b Video 1 S-Video Input: If the product connected to the Video 1 Audio Inputs i has S-video capability, connect this jack to the PLAY/OUT S-video jack on that unit and then make certain that the S-Video Monitor Output ° is connected as described above. c Optical Digital Audio Inputs: Connect the optical digital output from a DVD player, HDTV receiver, LD player or CD player to these jacks. The signal may be a Dolby Digital signal, a DTS signal or a standard PCM digital source. j Video 1 Audio/Video Outputs: Connect the composite or Video and L/R analog audio REC/IN jacks of a VCR or other video recording device such as a DVD recorder or PVR to these jacks. 37 41 47 51 k36 V4id0eo426 A5u0dio/Video Inputs: Connect the comp3o5site39or 4V5ideo49and L/R analog audio PLAY/OUT jacks o3f4a c3a8ble44tele4v8ision box or other video source to t3h3ese jack4s3. z 32 42 31 AM Antenna Terminals: Connect the AM loop antenna supplied with the receiver to these terminals. If an external AM antenna is used, make connections to the AM and GND terminals in accordance with the instructions supplied with the antenna. Note on video connections: When connecting a video source product such as a VCR, DVD player, satellite receiver, cable set-top box, personal video recorder or video game to the AVR 135, you may use either a composite or S-video connection, but not both. d Video 1 S-Video Output: If the product connected to the Video 1 Audio/Video Outputs j has S-video capability, connect this jack to the REC/IN S-video jack on that unit. e Video 2 S-Video Input: If the product connected to the Video 2 Audio/Video Inputs k has S-video capability, connect this jack to the PLAY/OUT S-video jack on that unit and then make certain that the S-Video Monitor Output ° is connected as described above. f 6/8-Channel Direct Inputs: These jacks are used for connection to source devices such as DVDAudio or SACD players with discrete analog outputs. Depending on the source device in use, all eight jacks may be used, though in many cases only connections to the front left/right, center, surround left/right and LFE (subwoofer input) jacks will be used for standard 5.1 audio signals. g Video Monitor Output: Connect this jack to the composite video input of a TV monitor or video projector to view the on-screen menus and the output of a standard video source. 8 REAR-PANEL CONNECTIONS