Harman Kardon AVR 135 Owners Manual - Page 31

PROGRAMMING THE REMOTE

PROGRAMMING THE REMOTE

31

c

will flash green to confirm each button press

as you enter commands.

NOTE:

While entering commands for Power On/Off of

any device during a macro sequence, press the

Mute

Button

. DO NOT press the actual Power button.

3. When all the steps have been entered, press the

Sleep Button

j

to enter the commands. The

red light under the

Input Selectors

ef

will

blink and then turn off.

Example:

To program the Macro 1 button so that it

turns on the AVR 135, TV and a cable box, follow

these steps:

• Press the

Macro 1 Button

and

Mute

Button

at the same time and then release

them.

• Note that the

Program Indicator

c

will flash

amber.

• Press the

AVR Selector

f

.

• Press the

Mute Button

to store the

AVR 135’s Power On command.

• Press the

VID 3 Input Selector Button

e

to

indicate the next command is for “TV Power On.”

• Press the

Mute Button

to store the TV

Power On Command.

• Press the

VID 2 Input Selector Button

e

to

indicate the next command is for “Cable Power On.”

• Press the

Mute Button

to store the Cable

Power On command.

• Press the

Sleep/Channel Up Button

j

to

complete the process and store the macro

sequence.

After following these steps, each time you press

the

Macro 1 Button

, the remote will send

the Power On/Off command.

Erasing Macro Commands

To remove the commands that have been pro-

grammed into one of the Macro buttons, follow these

steps:

1. Press the

Mute Button

and the

Macro

Button

that contains the commands you

wish to erase.

2. The

Program Indicator

c

will flash amber,

and the LED under the

AVR Selector

f

will

turn red.

3. Within ten seconds, press the

Surround Mode

Selector/Channel Down Button

k

.

4. The red LED under the

AVR Selector

f

will

go out, and the

Program Indicator

c

will turn

green and flash three times before it goes out.

5. When the

Program Indicator

c

goes out, the

Macro has been erased.

Figure 11

Programmed Device Functions

Once the AVR 135’s remote has been programmed for

the codes of other devices, press the appropriate

Input

Selector

e

to change the remote from controlling

the AVR 135 to controlling the additional product. When

you press any one of the selectors, it will briefly flash in

red to indicate that you have changed the device being

controlled.

When operating a device other than the AVR 135, the

controls may not correspond exactly to the function

printed on the remote or button. Some commands,

such as the volume control, are the same as they are

with the AVR 135. Other buttons will change their

function so that they correspond to a secondary label

on the remote. For example, the Sleep and Surround

mode selector buttons also function as the Channel Up

and Channel Down buttons when operating most TV

sets, VCRs or cable boxes. The Channel Up/Down

indication is printed directly on the remote. For many

standard CD players, cassette decks, VCRs and DVD

functions, the standard function icons are printed on

top of the buttons.

For some products, however, the function of a particu-

lar button does not follow the command printed on

the remote. In order to see which function a button

controls, consult the Function List tables on pages 33

and 34. To use those tables, first check the type of

device being controlled (e.g., TV, VCR). Next, look at

the remote control diagram in Figure 11. Note that

each button has a number on it.

T

o find out what function a particular button has for

a specific device, find the button number on the

Function List and then look in the column for the device

you are controlling. For example, button number 44

is the Direct button for the AVR 135, but it is the

“Favorite” button for many cable television boxes

and satellite receivers. Button number 30 is the Delay

button for the AVR 135, but the Open/Close button for

CD players.

NOTE:

The numbers used to describe the button

functions in Figure 11 for the purposes of describing

how a button operates are a different set of numbers

than those used in the rest of this manual to describe

the button functions for the AVR 135.

Notes on Using the AVR 135 Remote With

Other Devices.

•

Manufacturers may use different code sets for the

same product category. For that reason, it is impor-

tant that you check to see whether the code set you

have entered operates as many controls as possible.

If it appears that only a few functions operate, check

to see whether another code set will work with more

buttons.

135

30

41

30

41

41

41

41

30

41

Harman Kardon AVR 135 Owners Manual - Page 31

Programmed Device Functions

Page 31 highlights