Epson XP-4105 Users Guide - Page 44
Using WPS to Connect to a Network, Parent topic, Wi-Fi Recommended, Start Setup, Change Settings
View all Epson XP-4105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details. Using WPS to Connect to a Network Parent topic: Wi-Fi Networking Using WPS to Connect to a Network If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network. 1. Press the home button, if necessary. 2. Select the icon. You see a screen like this: 3. Select Wi-Fi (Recommended). 4. Select Start Setup or Change Settings. 5. Select Push Button Setup (WPS). 6. Follow the instructions on the LCD screen to complete WPS setup. Note: Make sure you press Start Setup within two minutes of activating WPS on your router. 44