Epson XP-340 Users Guide - Page 40

You see a screen like this: Note: Make a note of the SSID and password that appear. 9. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen and enter the password shown. 10. On your product control panel, press the OK button twice to exit. You see the connection symbol on the LCD screen and should be able to print from your device to your product. If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet. If the connection symbol does not appear on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat these steps to try again. Parent topic: Wi-Fi Direct Mode Setup Wi-Fi Protected Setup (WPS) If your network uses a WPS-enabled wireless router or access point, you can quickly connect your product to the network using Wi-Fi Protected Setup (WPS). Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details. Using WPS to Connect to a Network 40