Epson XP-340 Users Guide - Page 159
Print Head Nozzle Check, Cleaning the Print Head Using the Product Control Panel, Print head is clean
View all Epson XP-340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
8. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 9. Do one of the following: • If there are no gaps, select No and press the OK button. Press the stop button to exit. • If there are gaps or the pattern is faint, select Yes and press the OK button to continue. 10. Select Yes, press the OK button, and press the start button to clean the print head. 11. Select Nozzle Check, press the OK button, and press the start button to run a nozzle check to confirm that the print head is clean. 12. Follow the instructions on the screen to repeat the process as necessary. If you don't see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without printing and try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced. Parent topic: Print Head Nozzle Check Related tasks Cleaning the Print Head Using the Product Control Panel 159