Epson TM-T88IV Users Manual - Page 4

DIP Switch Tables DIP switch 1 (Serial Interface) SW Function ON 1-1 Data receive error Ignored 1-2 Receive buffer 45 bytes capacity 1-3 Handshaking XON/XOFF 1-4 Data word length 7 bits 1-5 Parity check Enabled 1-6 Parity selection Even 1-7 Transmission speed (See table A.) 1-8 OFF Prints "?" 4 KB DTR/DSR 8 bits Disabled Odd Table A Transmission speed (bps)-bits per second Adjustable by control commands* 4800 9600 19200 SW1-7 ON OFF ON OFF SW1-8 ON ON OFF OFF * Only when DIP Switches 1-7 and 1-8 are on, the transmission speed can be selected from one of seven speeds: 2400, 4800, 9600, 19200, 38400, 57600, and 115200 bps by control commands. The default is 38400. DIP switch 1 (Parallel/USB Interface) SW 1-1 1-2 1-3*1 1-4*1 1-5~ 1-7 1-8*2 Function ON Auto line feed Always enabled Receive buffer capacity 45 bytes Select paper sensors to Disabled output paper-end signals (default value of a command) from parallel I/F. Error signal output from Disabled parallel I/F Undefined Power saving function Disabled for USB OFF Always disabled 4 KB Roll Paper end sensor enabled, Roll Paper near-end sensor enabled Enabled Enabled *1: For USB I/F, DIP Switches 1-3 and 1-4 are Undefined. *2: For Parallel I/F, DIP Switch 1-8 is Undefined. iv