Epson SureColor F2270 Standard Edition Users Guide - Page 38
Use filtered pre-treatment solution within four days.
View all Epson SureColor F2270 Standard Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
• A bottle for filtration with a capacity of at least one liter (a bottle with measurement markings is recommended) Note: • Replace the filter with a new one after every liter of pre-treatment solution that is filtered • Do not reuse filters even if they did not filter one liter of solution. Any pre-treatment solution on the filter could get mixed in and cause unevenness to occur. • Use filtered pre-treatment solution within four days. • Make sure you filter the solution within the operating temperature range of the pre-treatment solution. 1. Place the pre-treatment solution container at the edge of a table with its spout pointing down. 38
38
•
A bottle for filtration with a capacity of at least one liter (a bottle with measurement markings is
recommended)
Note:
•
Replace the filter with a new one after every liter of pre-treatment solution that is filtered
•
Do not reuse filters even if they did not filter one liter of solution. Any pre-treatment solution on the filter
could get mixed in and cause unevenness to occur.
•
Use filtered pre-treatment solution within four days.
•
Make sure you filter the solution within the operating temperature range of the pre-treatment solution.
1.
Place the pre-treatment solution container at the edge of a table with its spout pointing down.