Epson SP4880CB User's Guide - Page 135

Paper thickness test pattern example: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 9. Examine the printed pattern to determine which set of lines are most closely aligned (showing the smallest gap), and note the corresponding number. 10. After the pattern is printed, THICKNESS NUM appears. Press or to select the number noted in step 9, then press Menu to save the selected value. 11. Press , then press . You see CUT METHOD in the lower row of the LCD. 12. Press Menu, press or to select STANDARD, THICK, SLOW, THICK, FAST, or THIN PAPER, then press Menu again to save the selected value. 13. Press , then press . You see PPR FEED ADJ in the lower row of the LCD. 14. Press Menu, press or to set the paper feed amount, then press Menu again to save the selected value. 15. Press , then press . You see EJECT ROLLER in the lower row of the LCD. 16. Press Menu, press or to select AUTO, SHEET, ROLL CURLED, or ROLL NORMAL, then press Menu again to save the selected value. 17. Press , then press . You see DRYING TIME in the lower row of the LCD. 18. Press Menu, press or to select the time in seconds, then press Menu again to save the selected value. 19. Press , then press . You see SUCTION in the lower row of the LCD. 20. Press press Menu, press or to select STANDARD, -1, -2, -3, or -4, then Menu again to save the selected value. The Control Panel 135