Epic Fitness Genesis 700 Uk Manual - Page 28
move the key.
View all Epic Fitness Genesis 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
PROBLEM: The shock does not assist the lowering of the treadmill frame SOLUTION: a. Environmental factors such as cold temperatures can affect the performance of the shock. To restore shock performance, hold the ends of the frame near the endcaps firmly with both hands, and carefully lower the frame to the floor and then raise it several times. To decrease the possibility of injury, bend your legs and keep your back straight. PROBLEM: The incline of the treadmill does not change correctly SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, remove the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system. PROBLEM: The chest pulse sensor does not function properly SOLUTION: a. If the chest pulse sensor does not function properly, see CHEST PULSE SENSOR TROUBLESHOOTING on page 9. b. If the chest pulse sensor still does not function properly, the battery should be changed. To replace the battery, first locate the battery cover on the back of the sensor unit. Insert a coin into the slot in the cover, and turn the cover counterclockwise to the "open" position. Then, remove the cover. b Battery Cover Next, remove the old battery from the sensor unit, and insert a new CR 2032 battery, with the battery oriented so the writing on top. Make sure that the rubber gasket is in place in the sensor unit. Then, reinsert the battery cover and turn it to the closed position. Battery Cover Battery Rubber Gasket 28