Epic Fitness Genesis 700 Uk Manual - Page 14
contacts for about 15 seconds.
View all Epic Fitness Genesis 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
To measure your heart rate, stand on the foot rails and hold the metal contacts-avoid moving your hands. When your pulse is detected, the heart symbol beside the Pulse/Speed display will flash, one or two dashes will appear, and then your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. 7 Turn on the fan if desired. To turn on the fan at low speed, press the Fan button. To turn on the fan at medium speed, press the button a second time. To turn on the fan at high speed, press the button a third time. To select the auto mode, press the button again; the word "Auto" will appear in the display. When the auto mode is selected, the speed of the fan will automatically increase and decrease as the speed of the walking belt increases and decreases. To turn off the fan, press the Fan button again. Note: If the fan is on when the walking belt is stopped, the fan will automatically turn off after a few minutes. 8 When you are finished exercising, remove the key. Step onto the foot rails, press the Stop button, and adjust the incline of the treadmill to the lowest setting. The incline must be at the lowest setting when the treadmill is folded to the storage position or the treadmill will be damaged. Next, remove the key from the console and put it in a secure place. Note: If the displays remain lit after the key is removed, the console is in the "demo" mode. See page 23 and turn off the demo mode. When you are finished using the treadmill, switch the on/off switch to the "off" position and unplug the power cord. 14