Dell Vostro 3478 Vostro 14-3478 Owners Manual - Page 35
Installing the power connector, Display assembly, Removing the display assembly
View all Dell Vostro 3478 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installing the power connector 1. Insert the power connector into the slot on the computer. 2. Secure the power connector to the computer by using 1 (M2x3) screw. 3. Install the: a) System board b) Coin cell battery c) System fan d) WLAN Card e) Memory module f) Heat sink g) Hard drive assembly h) Base cover i) Keyboard j) Optical drive k) Battery 4. Follow the procedure in After working inside your computer. Display assembly Removing the display assembly 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) Battery b) Optical drive c) Keyboard d) Base cover e) Hard drive assembly f) WLAN card 3. To remove the display assembly: a) Unroute the WLAN cable [1]. b) Peel white adhesive tape [2]. c) Lift the locking tab [3]. d) Disconnect the eDP cable [4]. Disassembly and reassembly 35