Dell Vostro 15 3568 Vostro 15-3568 Owners Manual - Page 38
Installing the power connector, Display assembly, Removing the display assembly
View all Dell Vostro 15 3568 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Installing the power connector 1. Insert the power connector into the slot on the computer. 2. Secure the power connector to the computer by using the single [ M2x2 (Big head 07)] screw. 3. Route the power connector cable. 4. Install the: a. system board b. system fan c. WLAN Card d. memory module e. heat sink f. hard drive assembly g. base cover h. keyboard i. optical drive j. battery 5. Follow the procedure in After working inside your computer. Display assembly Removing the display assembly 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. battery b. optical drive c. keyboard d. base cover e. WLAN card 3. To remove the display assembly: a. Unroute the WLAN cable [1]. b. Peel the adhesive tape [2]. c. Lift the locking tab [3]. d. Disconnect the eDP cable [4]. 38 Disassembly and reassembly