Dell Vostro 15 3568 Vostro 15-3568 Owners Manual - Page 28

Heat sink, Removing the heat sink

Get Dell Vostro 15 3568 PDF manuals and user guides View all Dell Vostro 15 3568 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

6. Tighten the two (M2.5L8) screws to secure the display hinge to the power button board. 7. Install the: a. base cover b. keyboard c. optical drive d. battery 8. Follow the procedures in After working inside your computer. Heat sink Removing the heat sink 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. battery b. optical drive c. keyboard d. base cover 3. To remove the heat sink: a. Loosen the four captive screws that secure the heat sink to the system board [1, 2, 3, 4]. NOTE: Loosen the screws in the order of the callout numbers [1, 2, 3, 4]. These screws are retention screws and cannot be fully removed. b. Remove the heat sink from the system board [5 ]. Installing the heat sink 1. Align the screws on the heat sink with the screw holders on the system board. 28 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
6.
Tighten the two (M2.5L8) screws to secure the display hinge to the power button board.
7.
Install the:
a.
base cover
b.
keyboard
c.
optical drive
d.
battery
8.
Follow the procedures in
After working inside your computer
.
Heat sink
Removing the heat sink
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
battery
b.
optical drive
c.
keyboard
d.
base cover
3.
To remove the heat sink:
a.
Loosen the four captive screws that secure the heat sink to the system board [1, 2, 3, 4].
NOTE:
Loosen the screws in the order of the callout numbers [1, 2, 3, 4]. These screws are retention screws and
cannot be fully removed.
b.
Remove the heat sink from the system board [5 ].
Installing the heat sink
1.
Align the screws on the heat sink with the screw holders on the system board.
28
Disassembly and reassembly