Dell SE2416H Dell Users Guide - Page 11
Setting up the monitor, Connecting the stand, Connecting your monitor
View all Dell SE2416H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Setting up the monitor Connecting the stand NOTE: The stand is detached when the monitor is shipped from the factory. To attach the monitor stand: 1. Place the monitor on a soft cloth or cushion. 2. Insert the tabs on the upper part of the stand in to the grooves on the back of the monitor. 3. Press down the stand till it snaps into place. 2 3 Connecting your monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. NOTE: Do not connect all cables to the computer at the same time. It is recommend to route the cables through the cable-management slot before you connect them to the monitor. To connect your monitor to the computer: 1. Turn Off your computer and disconnect the power cable. Connect the VGA/HDMI cable from your monitor to the computer. Setting up the monitor | 11