Dell PowerEdge HS5620 PowerEdge HS5620 Installation and Service Manual - Page 69
Installing and removing system components, Safety instructions, Before working inside your system
![]() |
View all Dell PowerEdge HS5620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
7 Installing and removing system components Topics: • Safety instructions • Before working inside your system • After working inside your system • Recommended tools • Optional front bezel • System cover • Drive backplane cover • Air shroud • Cooling fans • Side wall brackets • Intrusion switch • Optional serial COM port • Drives • Drive backplane • Cable routing • System memory • Processor and heat sink module • Expansion cards and expansion card risers • M.2 SSD module • PERC • Rear drive module • Optional OCP card • System battery • Optional internal USB card • Power supply unit • Power distribution board • System board • Trusted Platform Module • Control panel Safety instructions CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. NOTE: It is recommended that you always use an antistatic mat and antistatic strap while working on components inside the system. Before working inside your system Prerequisites Follow the safety guidelines listed in the Safety instructions. Installing and removing system components 69
![](/manual_guide/products/dell-poweredge-hs5620-poweredge-hs5620-installation-service-manual-e9c5cfe/69.png)