Dell Latitude 5400 Service Manual - Page 87
Replace the two M2x3 screws that secure the eDP cable bracket to the system board [5].
View all Dell Latitude 5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
4. Reroute the wireless antenna through the routing guides on the system board [1]. 5. Connect the cable to the connector on the system board [2]. 6. Connect the eDP cable to the eDP connector on the system board [3]. 7. Place the eDP cable bracket on the system board [4]. 8. Replace the two (M2x3) screws that secure the eDP cable bracket to the system board [5]. 9. Adhere the tape securing the eDP cable bracket on the system board [6]. Disassembly and reassembly 87
4.
Reroute the wireless antenna through the routing guides on the system board [1].
5.
Connect the cable to the connector on the system board [2].
6.
Connect the eDP cable to the eDP connector on the system board [3].
7.
Place the eDP cable bracket on the system board [4].
8.
Replace the two (M2x3) screws that secure the eDP cable bracket to the system board [5].
9.
Adhere the tape securing the eDP cable bracket on the system board [6].
Disassembly and reassembly
87