Dell Latitude 5400 Service Manual - Page 71
Adhere the adhesive tape on the eDP cable that is connected to the system board [5].
View all Dell Latitude 5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
3. Connect the cable to the connector on the system board [1]. 4. Connect the eDP cable to the connector on the system board [2]. 5. Place the eDP support bracket above the eDP connector [3]. 6. Replace the two (M2x3) screws to secure the eDP bracket to the system board [4]. 7. Adhere the adhesive tape on the eDP cable that is connected to the system board [5]. Disassembly and reassembly 71
3.
Connect the cable to the connector on the system board [1].
4.
Connect the eDP cable to the connector on the system board [2].
5.
Place the eDP support bracket above the eDP connector [3].
6.
Replace the two (M2x3) screws to secure the eDP bracket to the system board [4].
7.
Adhere the adhesive tape on the eDP cable that is connected to the system board [5].
Disassembly and reassembly
71