D-Link DIR-895L/R User Manual - Page 75
PPPoE, Username, Password, Reconnect, Maximum Idle, Address Mode, IP Address, Service Name
View all D-Link DIR-895L/R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Section 4 - Configuration PPPoE Select PPPoE if your Internet connection requires you to enter a username and password. This information is provided by your Internet service provider (ISP). Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. DIR-895L HW:A1 FW:1.00 Reconnect Select either Always-on, On-Demand, or Manual. Mode: Maximum Idle Enter a maximum idle time during which the Internet connection Time: is maintained during inactivity. To disable this feature, enable Autoreconnect. Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. IP Address: Enter the IP address provided by your ISP (Static IP only). Service Name: Enter the ISP service name (optional). Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. MAC Address The default MAC address is set to the Internet port's physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-895L User Manual 71