D-Link DIR-895L/R User Manual - Page 74
Static IP, IP Address, Subnet Mask, Default, Gateway, Primary DNS, Server, Secondary DNS, Clone
View all D-Link DIR-895L/R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Section 4 - Configuration Static IP Select Static IP if your IP information is provided by your Internet service provider (ISP). IP Address: Enter the IP address provided by your ISP. Subnet Mask: Enter the subnet mask provided by your ISP. Default Enter the default gateway address provided by your ISP. Gateway: Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. MAC Address The default MAC address is set to the Internet port's physical interface Clone: MAC address on the router. You can use drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. DIR-895L HW:A1 FW:1.00 D-Link DIR-895L User Manual 70