D-Link DIR-895L/R User Manual - Page 73
Dynamic IP DCHP, Host Name, Primary DNS, Server, Secondary DNS, MAC Address, Clone
View all D-Link DIR-895L/R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Section 4 - Configuration Dynamic IP (DCHP) Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not give you an IP address to use. Host Name: The host name is optional but may be required by some ISPs. Leave it blank if you are not sure. Primary DNS Enter the primary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP. Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. MAC Address The default MAC address is set to the Internet port's physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. DIR-895L HW:A1 FW:1.00 D-Link DIR-895L User Manual 69