D-Link DBG-2000 Product Manual - Page 45
Field, Description, Interface type, Interface name, IP address, Subnet mask, Gateway, Port state,
View all D-Link DBG-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
DBG-2000 User Guide The fields available in the Port Configuration table are as follows: Field Port Interface type Interface name IP address Subnet mask Gateway Port state Actions Description It displays the port number. It displays the type of interface. The options are WAN, DMZ, and LAN. It displays the name of the interface. It displays the IP address of the selected port. It displays the subnet mask for the IP address. It displays the gateway IP address. You can enable or disable the port state only when the Use profile configuration field is disabled. You can edit all the ports only when the Use Profile configuration field is disabled; otherwise, you can edit only Port 1. The Port Configuration section explains how to configure the following ports: WAN Port DMZ Port LAN Port WAN Port The gateway has a total of four ports, out of which Port 1, Port 2, and Port 3 can be used as WAN ports to establish a connection to the Internet. Port 1 can only be configured as a WAN port, while Port 2 and Port 3 can be configured as LAN, WAN, or DMZ port. It is assumed that you have arranged for Internet service with your Internet Service Provider (ISP). Please contact your ISP or network administrator for the configuration information required to set up the Nuclias cloud gateway. You can configure the WAN port in the Port Configuration section. Click Edit to open the respective port configuration page. Note: To configure the port, you must disable the "Use Profile Configuration" field. 45