D-Link DBG-2000 Product Manual - Page 125
Client IP VPN
View all D-Link DBG-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
DBG-2000 User Guide The fields available when the Access server-client mode is selected are as follows: Field Mode Username Server address Port(s) File Description Select the Access Server-Client mode. VPN setting Upload access server client It displays the user name of the client who is trying to connect to the server. It displays the IP address of the OpenVPN server to which the client is trying to connect. It displays the port numbers on which the client will connect with the OpenVPN server (or Access Server). Click Browse and locate the configuration file. Click Open, and then click Upload. The above table provides the status of the Access server-client connection, and the fields displayed in this table are as follows: Field Status Server IP Client IP (VPN) Description It displays the status of the VPN connection. It indicates whether the client is connected to the server or not. It displays the IP address of the server. It displays the client's IP address. GRE Tunnel GRE tunnels allow LAN broadcast traffic of the gateway to pass over the Internet and receive by the remote LAN hosts. While creating a GRE tunnel, a unique IP address should identify the GRE tunnel endpoint. It will be referenced in the other gateway's static route as the Gateway IP address. The Remote end-address in the GRE tunnel configuration page is the WAN IP address of the other endpoint gateway. Once the tunnel is established, a static route on the gateway can be made using the interface of the configured GRE tunnel. The destination IP address of the static route is the remote LAN subnet. The route's gateway IP address will be the GRE tunnel IP of the terminating gateway (the same gateway that manages the remote LAN subnet). Once these two steps are completed, the traffic can flow between the configured remote LAN subnets via the GRE tunnel. The fields displayed in the Configuration table are as follows: Field Name Interface GRE tunnel IP Description It displays the name of the GRE tunnel. It displays the interface with which this tunnel is created. It displays the IP address of this endpoint. 125