D-Link DAP-X1860 Product Manual - Page 38
Autoconfiguration SLAAC/DHCPv6, Static IPv6, Local Connectivity Only, Use the, following DNS address
View all D-Link DAP-X1860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Section 3 - Configuration IPv6 - Autoconfiguration (SLAAC/DHCPv6) My Internet Connection Select Autoconfiguration (SLAAC/DHCPv6) to have the is DAP-X1860 automatically receive an IPv6 address from the uplink router. Obtain a DNS server You can obtain IPv6 DNS server information automatically, address automatically or configure DNS servers manually by selecting Use the following DNS address. Primary DNS For manual settings, enter the primary IPv6 DNS server address. Secondary DNS For manual settings, enter the secondary IPv6 DNS server address. This is optional but will provide backup if the primary server fails. My Internet Connection is IPv6 - Static IPv6 Select Static IPv6 to manually assign an IP address to the DAP-X1860. IPv6 Address Assign an IPv6 address. This address should be outside of the uplink router's DHCP address pool. Subnet Prefix Length Enter the length of the IPv6 subnet prefix for identifying the IPv6 subnetwork. Default Gateway Enter the default gateway. Primary DNS Enter the primary IPv6 DNS server address. Secondary DNS Enter the secondary IPv6 DNS server address. This is optional but will provide backup if the primary server fails. IPv6 - Local Connectivity Only My Internet Connection Select Local Connectivity Only to set an IPv6 address only is for the local network. LAN IPv6 Link-Local The link-local address of the DAP-X1860 is used only within Address the local network specific to a physical interface. D-Link DAP-X1860 User Manual 35