Cisco N7K-C7018 Configuration Guide - Page 189
lacp max-bundle, show running-config interface port-channel, no lacp max-bundle
View all Cisco N7K-C7018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Chapter 6 Configuring Port Channels Configuring Port Channels Send document comments to [email protected] 3. lacp max-bundle number 4. show running-config interface port-channel number DETAILED STEPS Step 1 Command configure terminal Purpose Enters configuration mode. Step 2 Step 3 Step 4 Example: switch# configure terminal switch(config)# interface port-channel number Example: switch(config)# interface port-channel 3 switch(config-if) Specifies the interface to configure, and enters the interface configuration mode. lacp max-bundle number Example: switch(config-if)# lacp max-bundle Specifies the port-channel interface to configure max-bundle, and enters the interface configuration mode. The default value for the port-channel max-bundle is 16. The allowed range is from 1 to 16. Note Even if the default value is 16, the number of active members in a port channel is the minimum of the pc_max_links_config and pc_max_active_members that is allowed in the port channel. show running-config interface port-channel number (Optional) Displays the port-channel max-bundle configuration. Example: switch(config-if)# show running-config interface port-channel 3 Use the no lacp max-bundle command to restore the default port-channel max-bundle configuration. Command no lacp max-bundle Example: switch(config)# no lacp max-bundle Purpose Restores the default port-channel max-bundle configuration. This example shows how to configure the port channel interface max-bundle on module 3: switch# configure terminal switch (config)# lacp max-bundle 3 OL-23435-03 Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x 6-33